Twin Arm Wall Hook | 15 Degree Upswept Double Prong Hook with 10 mm Slot

Most hooks give you a single prong, so whatever you hang on it swings and turns. This one has two arms with a 10 mm gap running between them. Hang something across both arms and it is held at two points instead of one, so it sits square and stays put. Anything narrow enough — a strap, a cable, a cord, a tool handle, a utensil with a hanging tab — drops down into the slot instead of balancing on top of the hook.

Both arms rise away from the wall at 15 degrees. That tilt means the load settles back into the corner where the arms meet the plate rather than creeping out towards the tips, so things stay on when you brush past or when the weight shifts.

The whole hook is about 40 x 32 x 35 mm, small enough to put several in a row along a wall, inside a cupboard door, or above a workbench without them taking over the space. The back plate is flat so it sits against the wall, with a single countersunk screw hole through it that lets the screw head finish flush.

Features

1. Two arms with a 10 mm gap between them, so narrow items drop into the slot
2. Two contact points hold items square instead of letting them swivel
3. Arms angled 15 degrees upward so things do not slide off
4. Approximately 40 x 32 x 35 mm
5. Flat back plate sits flush against the wall
6. Single countersunk screw hole, screw head sits flush

About Latencot

Latencot is an Indian product studio making practical, everyday 3D-printed gear. Each item is printed to order in our own workshop, so we can offer designs you won't find in mass-produced accessories.

Shipping Details

We make our best effort to ship your order as quickly as possible. Shipping timelines, handling details, and regions we serve are all covered under our Shipping Policy (see footer).

Returns & Refunds

Your satisfaction is important to us. If there is any concern with your order, you can read about our return process and refund eligibility in our Refund Policy (see footer).