Lotus Mandala Shree Ganesh Threaded Net Frame | Hexagonal Shree Ganesh Wall Art

A flat-top hexagonal wall frame measuring 249 mm corner to corner, 217 mm across the flats, and 12 mm deep. The frame bar is 12 mm wide, and the opening inside it is filled edge to edge with an open honeycomb net built from 7 mm hexagonal cells drawn in 0.96 mm threads. The cells are open all the way through, so the wall behind the frame shows through the net.

Lord Ganesha sits at the centre of the net inside a lotus rosette. The crown petals, the tilak, the fanned ears, the coiled trunk, and the ring of dots around the rosette are each cut as separate strokes with gaps between them, so the drawing reads as line work rather than a solid panel. The motif measures about 156 x 164 mm and stands 5 mm proud of the net, which leaves it 7 mm below the front edge of the frame bar.

The bar, the net, and the motif are printed as one piece. There is no glue, no fasteners, and no assembly, and there is no glass or backing board.

Three keyhole hangers are recessed into the back face: one along the top edge and one on each of the two upper slanted edges. Each hanger takes the screw head through a 9 mm chamber and holds it behind a lip in a 5 mm slot, cut 8 mm into the 12 mm bar so nothing stands proud of the back and the frame sits flat against the wall. All three slots run uphill, so the frame's own weight seats the screw. The top keyhole is 40 mm long and the two side keyholes are 20 mm, giving travel to slide the frame level after the screws are in. One screw carries the frame; two or three hold it against rotation.

Features

1. Flat-top hexagon: 249 mm corner to corner, 217 mm across the flats, 12 mm deep
2. 12 mm wide frame bar around an open honeycomb net
3. Net of 7 mm hexagonal cells drawn in 0.96 mm threads, open through to the wall
4. Ganesh lotus mandala motif, about 156 x 164 mm, raised 5 mm off the net
5. Motif sits 7 mm below the front edge of the bar
6. Bar, net, and motif printed as one piece: no glue, no assembly, no glass
7. Three recessed keyhole hangers: one on the top edge, two on the upper side edges
8. 9 mm screw head chamber, 5 mm shank slot, 8 mm deep pocket, back face stays flat to the wall
9. 40 mm top keyhole and 20 mm side keyholes for levelling on the screws

About Latencot

Latencot is an Indian product studio making practical, everyday 3D-printed gear. Each item is printed to order in our own workshop, so we can offer designs you won't find in mass-produced accessories.

Shipping Details

We make our best effort to ship your order as quickly as possible. Shipping timelines, handling details, and regions we serve are all covered under our Shipping Policy (see footer).

Returns & Refunds

Your satisfaction is important to us. If there is any concern with your order, you can read about our return process and refund eligibility in our Refund Policy (see footer).