2 Inch Aluminium Channel Corner Bracket | 50 x 50 mm Perpendicular Fixing Bracket for Section Frames

A corner bracket for joining two aluminium channels at 90 degrees. It seats into the corner where the sections meet and takes fixings through both, so the joint is carried by the bracket rather than by screws driven into the channel wall alone.

The footprint is 50 x 50 mm and the height is 2 inch, matched to 2 inch channel. The full height bears against the face of the section, spreading the load down the depth of the joint instead of concentrating it at the edge.

Four countersunk holes at the corners of the face seat the screw heads flush, so a panel or a second section can sit against the face without fouling. Two elongated slots between them allow the bracket to be repositioned to square the frame before the fixings are tightened.

The underside is ribbed for stiffness across the corner. Outer edges are chamfered.

Features

1. Joins aluminium channel at 90 degrees
1. 50 x 50 mm footprint, length by width
1. 2 inch height, matched to 2 inch aluminium channel
1. Bears against the full depth of the section rather than the edge alone
1. Four countersunk fixing holes, screw heads seat flush
1. Two elongated slots for alignment before final tightening
1. Ribbed underside, chamfered outer edges

About Latencot

Latencot is an Indian product studio making practical, everyday 3D-printed gear. Each item is printed to order in our own workshop, so we can offer designs you won't find in mass-produced accessories.

Shipping Details

We make our best effort to ship your order as quickly as possible. Shipping timelines, handling details, and regions we serve are all covered under our Shipping Policy (see footer).

Returns & Refunds

Your satisfaction is important to us. If there is any concern with your order, you can read about our return process and refund eligibility in our Refund Policy (see footer).